Shantui 320HP Bulldozer SD32 with Excellent Performance
Shantui 320HP Bulldozer SD32 with Excellent Performance image
Basic Info.
Product Description
Product Description:
The installed WP12/QSNT-C345 electronically controlled engine conforms to the China-III non-road machinery emission regulation, featuring strong power, high efficiency and energy-saving, and low maintenance cost.
The rated power reaches 257kW, featuring high torque reserve coefficient.
The radially sealed intake system is applied to effectively prolong the engine life.
The curves of drive system and engine are perfectly matched to achieve more extensive high-efficiency zone and higher transmission efficiency.
Shantui’s self-made drive system features stable performance and reliable quality and has been long proved by the market.
The hexahedral cab provides super-large interior space and broad vision and the ROPS/FOPS can be installed depending on specific needs to ensure high safety and reliability.
The electronic control hand and foot accelerators guarantee more accurate and comfortable operations.
The intelligent display and control terminal and the A/C and heating system are installed to provide more abundant personalized driving/riding experience and enable you to understand system status at any time, featuring high intelligence and convenience.
Shantui’s stable and reliable chassis system is applicable to diversified severe working conditions.
The product features long ground length, high ground clearance, stable driving, and good trafficability.
The straight tilting blade, semi-U blade, angle blade, coal blade, rock blade, environmental sanitation blade, ripper, and traction frame can be installed depending on specific working condition to achieve higher working adaptability. The standard LED working lamps improve the illumination capability during nighttime operations to achieve higher safety and reliability.
The structural parts inherit the excellent quality of Shantui’s mature products;
The electric harnesses adopt corrugated pipes for protection and deconcentrators for branching, featuring high protection grade.
|
Engine
|
Model & type
|
Cummins NTA855-C360S10; In-line, water-cooled; 4-cycle,
overhead valve direct injection, turbocharged diesel |
||
|
Rated revolution
|
2000 rpm
|
|||
|
Horsepower
|
Gross power: 257/345/2000 kW/HP/rpm //
Net power: 235/320/2000 kW/HP/rpm |
|||
|
Number of cylinders
|
6-139.7 x 152.4 (mm x stroke)
|
|||
|
Piston displacement
|
14010 ml
|
|||
|
Min. fuel consumption
|
245 g/kW·h
|
|||
|
Maximum torque
|
1440 N·m@1400rpm
|
|||
|
Power
transmission system |
Torque converter
|
3-element, 1 stage, 1 phase
|
||
|
Transmission
|
Planetary gear, multi-disc clutch, power shift,
forced lubrication |
|||
|
Main drive
|
Spiral bevel gear, splash lubrication,
single-stage speed reduction |
|||
|
Steering clutch
|
Wet, multi-disc, spring loaded,
hydraulically separated, hydraulic control |
|||
|
Steering brake
|
Wet, floating band, foot brake with hydraulic booster
|
|||
|
Final drive
|
2-stage speed reduction of spur gear, splash lubrication
|
|||
|
Travel speed
|
Gear
|
1st
|
2nd
|
3rd
|
|
Forward
|
0~3.6 km/h
|
0~6.6 km/h
|
0~11.5 km/h
|
|
|
Reverse
|
0~4.4 km/h
|
0~7.8 km/h
|
0~13.5 km/h
|
|
|
Undercarriage
system |
Type
|
Swing type of sprayed beam, suspended structure of equalizer bar
|
||
|
Carrier rollers
|
2 each side
|
|||
|
Track rollers
|
7 each side (single flange 5, double flange 2)
|
|||
|
Track type
|
41 each side
|
|||
|
Width of track shoes
|
560 mm
|
|||
|
Pitch
|
228.6 mm
|
|||
|
Hydraulic
System |
Maximum pressure
|
14 MPa
|
||
|
Pump type
|
Gear pump
|
|||
|
Discharge
(at revolution of 2000 rpm) |
355 (1795 rpm) L/min
|
|||
|
Bore of working cylinder ×
no. (double-acting type) |
140 mm × 2
|
|||
|
Blade
|
Blade Type
|
Straight-tilt
|
Angle
|
Semi-U blade
|
|
Dozing capacity
|
10 m 3
|
6 m 3
|
11.9 m 3
|
|
|
Efficiency
(Theoretical value 40 m) |
580 m 3 /h
|
350 m 3 /h
|
690 m 3 /h
|
|
|
Blade width
|
4130 mm
|
5000 mm
|
4130 mm
|
|
|
Blade height
|
1590 mm
|
1140 mm
|
1710 mm
|
|
|
Maximum drop below ground
|
560 mm
|
630 mm
|
560 mm
|
|
|
Maximum tilt adjustment
|
1000 mm
|
500 mm
|
1000 mm
|
|
|
Weight of blade
|
4520 kg
|
4932 kg
|
4924 kg
|
|
|
Riipper
(Optional) |
Maximum digging
depth of 3-shank ripper |
842 mm
|
||
|
Maximum lift above ground
|
883 mm
|
|||
|
Weight of 3-shank ripper
|
3802 kg
|
|||
|
Maximum digging
depth of single ripper |
1250 mm
|
|||
|
Maximum lift above ground
|
965 mm
|
|||
|
Weight of single ripper
|
3252 kg
|
|||
We are China Shantui 320HP Bulldozer SD32 with Excellent Performance manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: Bulldozers, SD32 Bulldozer Shantui, Shantui Bulldozer SD32Similar Or Related
Contact Information
- Mobile : (86) 15238067380
- WhatsApp : (86) 15238067380
- Email : [email protected]
If you have any questions or would like to book a session please contact us.
