Liugong Brand 180HP Motor Grader Road Grader with Front Blade and 3-Shanks Ripper Clg4180d

Liugong Brand 180HP Motor Grader Road Grader with Front Blade and 3-Shanks Ripper Clg4180d image

Get a Quote Email to us

Product Description

Overview
Product Description
Product Parameters
Detailed Photos
Our Advantages

Basic Info.

Model NO.

CLG4180D

Walking Mode

Wheeled

Type

Medium-sized Grader

Engine

Dongfeng Cumnins

Gross Power

160(215)@2200kw(HP)@Rpm

Net Power

144(195)@2200kw(HP)@Rpm

Peak Torque

908n. M/1500rpm

Number of Cylinders

Blade Width

3960(156)mm(Inches)

Maximum Speed

40.3 (25)Km/H (Mph)

Operating Weight

16500(36376)Kg(Lb)

Cutting Depth

600(24)mm(Inches)

Maximum Draw Pull

90(Kn)

Transport Package

Nube

Specification

8971*2600*3438mm

Trademark

Liugong

Origin

Hunan, China

HS Code

84295100

Production Capacity

10000 Units/Year

Product Description

Liugong Brand 180HP Motor Grader Road Grader with Front Blade and 3-shanks Ripper CLG4180D

Fuel Efficient Dongfeng Cummins Engine.
Low Vibration, Noise, Dust +UV Resistant cab
Meritor wet axle with "no-spin" differential lock as standard
Balance box enables the 4 rear wheels to swing up and down by +/- 15°

Engine		DCEC 6CTAA8.3-C215
Rated Power	(kW)	160(215)@2200
Blade Width	mm(inches)	3960(156)
Maximum Speed	Km/h (mph)	40.3 (25)
Draw Bar Pull	(kN)	86
Operating Weight	Kg(Lb)	16500(36376)
ENGINE
Tier		II
Make		Dongfeng Cummins
Gross Power	KW(HP)@rpm	160(215)@2200
Net Power	KW(HP)@rpm	144(195)@2200
Peak Torque		908N. M/1500rpm
Torque Rise %		31%
Number of Cylinders		6
Aspiration		Turbo air-to-air aftercooled
TRANSMISSION
Transmission Type		Power shift
Transmission Configuration		6f/3r
Torque Converter		Three-member single turbine
Maximum Travel Speed, fwd	(km/h)	42 (25.8)
Maximum Travel Speed, rev	(km/h)	25.6 (15.9)
Number of Speeds, fwd		6
Number of Speeds, rev		3
AXLES
Front Axle Make		LiuGong Weld axle
Rear Axle Make		Meritor
Differential Type		No-spin limited slip standard
Final Drive Type		Chain drive
Axle Oscillation		±15°
Front Axle Type		All welded steel frame
Front Axle, Wheel Lean Angle		±17°
STEERING
Steering Configuration		Load sensor steering gear
Steering Relief Pressure	(MPa)	17
Minimum Turning Radius	(inches)	8000(315)
Steering Angle		±45°
Frame Articulation Angle		±20°
BRAKES
Service Brake Type		(Dry)shoe
Service Brake Location		Rear axle only
Service Brake Actuation		Hydraumatic
TIRES
Tire Size		17.5-25 PR12/L3
HYDRAULIC SYSTEM
Main Pump Type		Gear
Main Relief Pressure	(MPa)	18
Pilot Pump Flow	L(Gal)/min	126(33)
WORKING CAPACITIES
Maximum Draw Pull	(kN)	90
Cutting Pressure	Kg(Lb)	8100(17857)
TANDEM DRIVE PERFORMANCE
Height	mm(inches)	600(24)
Width	mm(inches)	210(8)
Thickness, inner wall / outer wall	mm(inches)	20/20(0.8/(0.8)
Center Distance	mm(inches)	1538(61)
Oscillating Angle		±15°
MOLDBOARD PERFORMANCE
Bank Cut Angle		40~70
Moldboard Lift Above Ground	mm(inches)	405(16)
Moldboard Side Shift, right / left	mm(inches)	725/675(29/27)
Maximum Sloping Angle		90°
Cutting Depth	mm(inches)	600(24)
Circle Rotation		360°
Circle Diameter	mm(inches)	1455(57)
Circle Thickness	mm(inches)	140(6)
DIMENSIONS
Wheelbase	mm(inches)	6230(245)
Overall Length	mm(inches)	8971(353)
Overall Height with Cab		3438(135)
Overall Width	mm(inches)	2600(102)
Clearance under Front Axle	mm(inches)	645(25)
Moldboard Standard Length	mm(inches)	4270(168)
Moldboard Standard Thickness	mm(inches)	19(0.7)
Moldboard Standard Height	mm(inches)	650(24)
OPERATING WEIGHTS
Operating Weight	Kg(Lb)	16500(36376)
On Front Wheels	Kg(Lb)	4700(10362)
On Rear Wheels	Kg(Lb)	11800(26015)
SERVICE CAPACITIES
Fuel Tank	L(Gal)	230(61)
Engine Oil	L(Gal)	22(6)
Cooling System	L(Gal)	45(12)
Hydraulic Reservoir	L(Gal)	186(49)
Transmission And Torque Converter	L(Gal)	45(12)
Tandems, Each	L(Gal)	28(7)

We are China Liugong Brand 180HP Motor Grader Road Grader with Front Blade and 3-Shanks Ripper Clg4180d manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.