High Quality Single Girder Gantry Crane with Electric Hoist
High Quality Single Girder Gantry Crane with Electric Hoist image
Basic Info.
Product Description
Gantry cranes are an excellent alternative to permanent indoor overhead cranes, which minimal investment in any new building by eliminating the need for increased foundational and structural considerations. In addition, they can be disassembled and moved to a new location easily.
MH Single Girder Gantry cranes are widely used for moving heavy objects within rail yards, factories, and warehouses. They are smaller than MG Double Gantry crane and cost lower than MG Crane too.
Our Designed MH Gantry cranes can lift heavy loads up to 32t. Its spans can be over 30 meters. For fabrication and freight-transfer applications, it can move loads rapidly and smoothly.
Accessories:
| 1- Lifting Mechanism – Monorail wire rope hoist or chain hoist or manual hoist as option: – Lifting speed: single or dual as per required – Trolley Speed: Single or Dual or Step less as per required – High performance with most economical price |
|
| 2-Driven Bogie and Bottom Beam -Forged Flanged wheel -Rigid welded box type beam -Compact layout |
|
| 3-Griders and Legs – Main girder and 4 legs are welded box type or truss girders as option. -Material: carbon steel with high quality of Q235B or Q345B -The main girder is connected by strength bolt. -Weld joint tested by X ray or ultrasonic examination; – Modula design – Designed Deflection≤1/800 of span |
|
| 4-Control -Cabin control -Independent pendent control as option -Wireless control as option |
|
| 5-Electric Part -Conductor power supply -All hoist and crane movements are independent and can be run simultaneously. -Protection degree IP55 -The components are positioned in a maintenance friendly way, and the whole layout provides with good protection -Festoon cables are suspended on cable saddles, fixed to cable trolleys, running in a galvanized C-track. |
|
| 5-Safe Protection -Emergency-off switch -Overload protect -Earth protection -Zero Position Protection -Cross travel and long travel protection -Lifting travel protection -Overheating protection of motor -Equipped with rainproof devices – Alarm Bell and Lamp -Anemometer and aviation obstruction light as option |
Technical Data:
| MH Single Girder Gantry Crane | ||||
| Capacity(t) | 0.5t~20t as per requirements | |||
| Span(m) | 7m~25m, or other special span | |||
| Lifting Height(m) | 6m~30m or other specail height | |||
| Lifting Speed(m/min) | single lifting speed or stepless speed(designed as per requirements) | |||
| Trolley Speed(m/min) | single lifting speed or stepless speed(designed as per requirements) | |||
| Bridge Speed(m/min) | single lifting speed or stepless speed(designed as per requirements) | |||
| Working Duty | A3~A5 depends on application | |||
| Power supply | 380V,50Hz or other | |||
| Crane Inquiry Data Sheet | ||||
| Nos. Crane required | ||||
| Capacity | Main Hook | Aux. hook | ||
| Span of the Crane | ||||
| Required Hook Lift | Main Hook | Aux. hook | ||
| Length of Runway | ||||
| Working Ambient | ||||
| Working Duty | Using Frequency | |||
| Application | ||||
| Power Supply | Volts Hz Phase | |||
| Control Method | cabin | floor | ||
| wireless | other | |||
| Lifting capacity | t | 3 | 16 | |||||||||
| Span | m | 12 | 16 | 20 | 24 | 12 | 16 | 20 | 24 | 30 | ||
| Lifting height | m | 6/9 | 6/9 | 9 | ||||||||
| Travelling mechanism | Travelling speed | Ground | m/min | 20 | 20 | |||||||
| Controling room | 20 30 45 | 30 40 | ||||||||||
| Motor | Ground | ZDY1(D)21-4/0.8 X2 | ZDY1(D)22-4/1.5 X2 | YZR132M2-6/4 X2 | YZR160m1-6/6.3 X2 | |||||||
| Controling room | ZDY21-4/0.8 X2 | ZDR100-4(D)1.5 X2 | YZR160M2-6/8.5 X2 | |||||||||
| Reducer | LD | ZSC400 | ZSC(A)600 | |||||||||
| Wheel diameter | mm | Φ270 | Φ400 | Φ400 | Φ500 | |||||||
| Electric hoist | Type | CD1 MD1 | CD1 MD1 | |||||||||
| Lifting speed | m/min | 8 0.8/8 | 3.5 3.5/0.35 | |||||||||
| Travelling speed | m/min | 20 | 20 | |||||||||
| Motor | Lifting | ZD141-4/4.5 ZDS10.4/4.5 | ZDS11.5/13 | |||||||||
| Travelling | ZDY112-4/0.4 | ZDY121-4/0.8 X2 | ||||||||||
| Working system | A5 | A5 | ||||||||||
| Steel track recommended | P34 P38 | P38 | P43 | |||||||||
| Power source | 3-Phase 380V 50Hz | 3-Phase 380V 50Hz | ||||||||||
| The crane weight | Ground | t | 7.4/8.7 | 8.6/9.9 | 11.3/12.6 | 13/14.3 | 16.2/18.2 | 18.6/20.7 | 23.3/25.5 | 25.9/28.1 | 35 | |
| Controling room | t | 8.2/9.9 | 9.4/11.1 | 12.1/13.8 | 13.8/15.5 | 17.1/19.5 | 19.5/22 | 24.2/26.8 | 26.8/29.4 | 33.7 | ||
| Max. wheel load | KN | 37/42 | 40/46 | 44/50 | 48/54 | 143/150 | 152/159 | 165/174 | 169/176 | 180/190 | ||
| Basic dimendions | L1 | mm | 3000 | 4000 | 5000 | 6000 | 3000 | 4000 | 5000 | 6000 | ||
| L2 | 3000 | 4000 | 5000 | 6000 | ||||||||
| H1 | 1120 | 2300 | ||||||||||
| H2 | 650 | 700 | 800 | 900 | 1100 | 1200 | 1300 | 1400 | 1600 | |||
| H3 | 7635/10635 | 7685/10685 | 7785/10785 | 7885/10885 | 9500/12600 | 9600/12600 | 9700/12700 | 9800/12800 | 9950/9700 | |||
| B | 4500/5500 | 5500/6500 | 5500/6000 | 6500/7500 | ||||||||
| B1 | 5000/6000 | 6000/7000 | 6500/7000 | 7500/8500 | ||||||||
| B2 | 5400/6400 | 6500/7500 | 7000/7500 | 8200/9200 | ||||||||
| B3 | 1500 | 1600 | 1700 | |||||||||
Products Range:
We are China High Quality Single Girder Gantry Crane with Electric Hoist manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: Crane, Gantry Crane, Single Girder Gantry CraneSimilar Or Related
Contact Information
- Mobile : (86) 15238067380
- WhatsApp : (86) 15238067380
- Email : [email protected]
If you have any questions or would like to book a session please contact us.
