165HP Mining Grader Motor GR165

Road equipment 165hp motor grader with Cummins Engine GR165.

165hp motor grader with Cummins Engine GR165 is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as road construction, airports, farmlands etc. 

Motor grader GR165 is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

GR165 motor grader advantages and highlights:

1. The GR165 adopts Dongfeng Cummins 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.

2. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.

3. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.

4. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.

5. The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.

• Item			GR165
  Basic parameters	Engine model		6BTA5.9
  	Rated power/speed		130kW/2200rpm
  	Overall dimension (standard)		8900*2625*3470mm
  	Total weight (standard)		15000kg
  	Tire specification		17.5-25
  	Ground clearance (front axle)		430mm
  	Tread		2156mm
  	Space of front and rear axles		6219 mm
  Performance parameters	Forward velocity		5,8,11,19,23,38km/h
  	Reverse speed		5,11,23km/h
  	Tractive effort f=0.75		77kN
  	Maximum gradeability		0.25
  	Tire inflation pressure		260kPa
  	Working system pressure		16MPa
  	Transmission pressure		1.3-1.8Mpa
  Working parameters	Maximum steering angle of front wheel		±50°
  	Maximum slant angle of front wheel		±17°
  	Maximum oscillating angle of front axle		±15°
  	Maximum oscillating angle of equilibrium box		±15°
  	Maximum steering angle of frame		±27°
  	Minimum turning radius		7.3m
  	Scrape knife	Maximum lift height	450mm
  		Maximum cutting depth	500mm
  		Maximum tilt angle	90°
  		Cutting angle	28°-70°
  		Angle of revolution	360°
  		Length & chord height	3660*610mm
  Oil filling amount	Coolant		50L
  	Fuel tank		280L
  	Engine		24L
  	Transmission		38L
  	Hydraulic oil		110L
  	Drive axle		28L
  	Balancing box		46 L

Picture

Our company