Earthmoving Construction Machinery Caterpillar 950gc 5ton Front End Wheel Loader with CAT Engine
The new Cat® 950 GC Wheel Loader is designed specifically to handle all the jobs on your worksite from material handling and truck loading, to general construction, to stockpiling. This machine is purpose-built to be just the right machine to get your everyday jobs done. Great machine performance combined with low owning and operating costs make the 950 GC the right choice for your business.
ENGINE
UNITS:
| Net Power – ISO 9249 |
151.0 kW |
| Engine Model |
Cat? C7.1 |
| Bore |
105.0 mm |
| Stroke |
135.0 mm |
| Displacement |
7.01 l |
| Maximum Gross Power – 2,000 rpm – ISO 14396 |
171.0 kW |
| Maximum Gross Torque – 1,400 rpm |
1020.0 N·m |
| Maximum Net Torque – 1,300 rpm |
931.0 N·m |
| Rated Gross Power – 2,200 rpm – ISO 14396 |
168.0 kW |
| Rated Net Power – 2,200 rpm – ISO 9249 |
151.0 kW |
WEIGHTS
| Operating Weight |
18676.0 kg |
BUCKETS
| Bucket Capacities |
2.5 m3 to 4.4 m3 (3.3 yd3 to 5.75 yd3) |
OPERATING SPECIFICATIONS
| Breakout Force |
147.0 kN |
| Note (1) |
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5. |
| Note (2) |
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load – Full 40° Turn – ISO 14397-1* |
10503.0 kg |
| Static Tipping Load – Full 40° Turn – Rigid Tires** |
11197.0 kg |
TRANSMISSION
| Forward – 1 |
7.0 km/h |
| Forward – 2 |
12.5 km/h |
| Forward – 3 |
22.0 km/h |
| Forward – 4 |
34.0 km/h |
| Reverse – 1 |
7.0 km/h |
| Reverse – 2 |
12.5 km/h |
| Reverse – 3 |
22.0 km/h |
HYDRAULIC SYSTEM
| Steering System – Pump Type |
Piston |
| Hydraulic Cycle Time – Dump, at Maximum Raise |
1.2 s |
| Hydraulic Cycle Time – Lower, Empty, Float Down |
2.8 s |
| Hydraulic Cycle Time – Raise from Carry Position |
6.1 s |
| Hydraulic Cycle Time – Total Cycle Time |
10.1 s |
| Implement System – Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) |
27900.0 kPa |
| Implement System – Maximum Pump Output at 2,200 rpm |
248.0 l/min |
| Implement System – Optional 3rd Function Maximum Flow |
280.0 l/min |
| Implement System – Optional 3rd Function Maximum Pressure @ 70 L/min |
20680.0 kPa |
| Implement System Pump Type |
Piston |
BRAKES
| Brakes |
Brakes meet ISO 3450 |
TIRES
| Choices |
Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25 ??, L3 (Triangle); 23.5R25 ?, L3 (Bridgestone) |
CAB
| ROPS/FOPS |
ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards |
SERVICE REFILL CAPACITIES
| Cooling System |
48.0 l |
| Crankcase |
20.0 l |
| Differential – Final Drives – Front |
40.0 l |
| Differential – Final Drives – Rear |
38.0 l |
| Fuel Tank Size |
290.0 l |
| Hydraulic Tank |
120.0 l |
| Transmission |
45.0 l |
DIMENSIONS
| B-Pin Height |
4188.0 mm |
| B-Pin Height – Carry |
655.0 mm |
| Centerline of Rear Axle to Edge of Counterweight |
2001.0 mm |
| Lift Arm Clearance |
3649.0 mm |
| Height – Top of ROPS |
3458.0 mm |
| Height – Top of Exhaust Pipe |
3596.0 mm |
| Height – Top of Hood |
2568.0 mm |
| Ground Clearance |
460.0 mm |
| Wheel Base |
3300.0 mm |
| Centerline of Rear Axle to Hitch |
1650.0 mm |
| Rack Back – Maximum Lift |
60.0 ° |
| Dump Angle at Maximum Lift |
52.0 ° |
| Rack Back – Carry |
45.0 ° |
| Rack Back – Ground |
40.0 ° |
| Height – Center Line of Axle |
750.0 mm |
TURNING RADIUS
| Turning Radius – Inside of Tires |
3419.0 mm |
| Turning Radius – Outside Edge of Counterweight |
6190.0 mm |
| Turning Radius – Outside of Tires |
6164.0 mm |
| Width – Over Tires |
2745.0 mm |
Picture show
About Company:
