China Road Machinery Equipment 10m³ Asphalt Distributor Finisher Tank Truck
China Road Machinery Equipment 10m³ Asphalt Distributor Finisher Tank Truck image
- Overview
- Product Description
- Product Parameters
- Detailed Photos
- Company Profile
Basic Info.
Model NO.
CLW5160GLQZ4
Tank Volume
＜5000L
Drive Wheel
6×4
Seats
≤5
Horsepower
351-450hp
Engine Capacity
4-6L
Storage
Concrete
Tire Certification
ECE, GCC, ISO
Tire Design
Bias
Condition
New
Transmission
Munual
Rear Axles
Hc16 Ratio:5.73
Front Axles
Hf9 Drum-Type
Front/Rear Overhang(mm)
1500/1739
Wheel Base(mm)
3625+1350
Tires
12.00r20 16pr
Approach/Departure Angle(°)
19/26
Maximum Speed(Km/H)
75
Dimensions(mm)
9950*2500*3450mm
Capacity
10m3
Transport Package
Roro
Specification
9950*2500*3450mm
Trademark
Top Brand
Origin
China
HS Code
8429510000
Production Capacity
1000units/Moth
Product Description
Sinotruk Howo Diesel Concrete Mixer Drum ZZ1317M3261W Concrete Mixer Truck
1. Manual/automatic control of spray volume and working width. Each nozzle can be controlled separately, and the determinant nozzle can be freely combined to realize the width of any adjustable spray. Sprinkle control can be performed in the cab or on the rear platform.
2. The automatic control system can measure the speed of the vehicle and automatically calculate the number of revolutions of the asphalt pump according to the amount of the supplied cloth and the width of the spray and the type of asphalt, and then automatically adjust the number of pumps of the asphalt pump through the system.
3. vehicle-mounted rapid heating system (10-15 ° C / h), can improve heating efficiency and reduce construction assistance time to ensure the temperature of the cloth;
4. Punching nozzle This system can blow the remaining asphalt of the nozzle through the diesel and high-pressure air to prevent the asphalt from freezing in the nozzle and improve the service life of the nozzle.
Personalized equipment:
1. Parts of the key parts of the vehicle (hydraulic pump, hydraulic motor, asphalt pump, proportional valve, automatic control system), etc., adopt internationally best components to effectively extend the service life;
2. using the international advanced high-viscosity asphalt pump, the external asphalt can be pumped into the tank to achieve "self-priming", and the asphalt in the tank can also be pumped out;
3. the heating system uses imported Italian burners, with automatic ignition and temperature control;
4. All heat pipes have heat insulation layers on the outside to reduce the heat dissipation while avoiding burns to the operators;
5. The asphalt spray bar adopts a three-stage folding structure. Double or multiple spray can be realized by moving the spreader bar up and down. By moving the spreader bar left and right, the spread range can be expanded, and the obstacle can be effectively avoided.
6. There is a sedimentation drain tank inside the asphalt tank, and it is equipped with liquid level display, alarm and safety device.
2. The automatic control system can measure the speed of the vehicle and automatically calculate the number of revolutions of the asphalt pump according to the amount of the supplied cloth and the width of the spray and the type of asphalt, and then automatically adjust the number of pumps of the asphalt pump through the system.
3. vehicle-mounted rapid heating system (10-15 ° C / h), can improve heating efficiency and reduce construction assistance time to ensure the temperature of the cloth;
4. Punching nozzle This system can blow the remaining asphalt of the nozzle through the diesel and high-pressure air to prevent the asphalt from freezing in the nozzle and improve the service life of the nozzle.
Personalized equipment:
1. Parts of the key parts of the vehicle (hydraulic pump, hydraulic motor, asphalt pump, proportional valve, automatic control system), etc., adopt internationally best components to effectively extend the service life;
2. using the international advanced high-viscosity asphalt pump, the external asphalt can be pumped into the tank to achieve "self-priming", and the asphalt in the tank can also be pumped out;
3. the heating system uses imported Italian burners, with automatic ignition and temperature control;
4. All heat pipes have heat insulation layers on the outside to reduce the heat dissipation while avoiding burns to the operators;
5. The asphalt spray bar adopts a three-stage folding structure. Double or multiple spray can be realized by moving the spreader bar up and down. By moving the spreader bar left and right, the spread range can be expanded, and the obstacle can be effectively avoided.
6. There is a sedimentation drain tank inside the asphalt tank, and it is equipped with liquid level display, alarm and safety device.
|
Main parameter
|
|
|||
|
Product Name
|
bitumen spraying truck,asphalt tank truck
|
|
||
|
Overall Dimension(mm)
|
9950*2500*3450
|
Max speed(km/h)
|
80
|
|
|
Gross weight(kg)
|
25000
|
Curb weight(kg)
|
16000
|
|
|
Driving type
|
6×2
|
Transmission type
|
munual
|
|
|
Condition
|
New
|
Paving Width(m)
|
6
|
|
|
Tank Volume(CBM)
|
10.56
|
Paving Speed(m/min)
|
0-16
|
|
|
|
|
|||
|
Chassis parameter
|
|
|||
|
Chassis model
|
ZZ1257N4347E1
|
Axles quantity
|
3
|
|
|
Wheelbase(mm)
|
4025+1350
|
Engine Standard
|
euor III- V
|
|
|
Wheel loading
|
7000/18000(2)
|
Overhang(mm)
|
1500/2750
|
|
|
Tyre quantity
|
10
|
Tyre size
|
12.00R20 16PR
|
|
|
Displacement(L)
|
9.7
|
Rated power(hp)
|
380
|
|
We are China China Road Machinery Equipment 10m³ Asphalt Distributor Finisher Tank Truck manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: China Asphalt Distributor, China Asphalt Distributor Craigslist, China Road Machinery Equipment 10m³ Asphalt Distributor Finisher Tank Truck
