China Made Src600c 60 Ton Rough Terrain Crane
China Made Src600c 60 Ton Rough Terrain Crane image
Basic Info.
Model NO.
SRC600C
Shaft Number
3
Crane Jib
Five-Arm
Type
Straight Arm
Max. Travel Speed
33km/H
Min. Turning Diameter
7.5m
Transport Package
Nude, Spare Parts and Tools Into Standard Cases
Specification
14900*3500*3990mm
Trademark
Oriemac
Origin
Jiangsu, China
HS Code
87051091
Production Capacity
5000PCS/Year
Product Description
China made SRC600C 60 Ton Rough Terrain Crane
1. The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted from the rated lifting load.
2. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection. Take boom deflection into consideration before beginning a lifting operation.
3. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
4. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
5. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
2. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection. Take boom deflection into consideration before beginning a lifting operation.
3. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
4. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
5. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
6. The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.
| Main Technical Data Table in Travel configuration | ||
| Item | Parameters | Unit |
| Overall Length | 13750 | mm |
| Overall Width | 2750 | mm |
| Overall Height | 3800 | mm |
| Alex Base | 1450+4000+1350 | mm |
| Total vehicle mass in travel configuration | 42000 | kg |
| Axle load-1,2 | 16000 | kg |
| Axle load-3,4 | 26000 | |
| Engine Model | —- | |
| Engine rated power | 250/2100 | kw/(r/min) |
| Engine rated torque | 1425/1200 | N.m/(r/min) |
| Max. travel speed | 85 | km/h |
| Min. turning diameter | 12 | m |
| Min. ground clearance | 295 | mm |
| Max. grade ability | 40 | % |
| Approach angle | 18 | ° |
| Departure angle | 12 | ° |
| Braking distance (at 30 km/h, full load ) | — | m |
| Oil consumption per 100km | ≤45 | L |
| Main Technical Data Table for Lifting Operation | ||
| Item | Parameters | Unit |
| Max. rated total lifting capacity | 60 | t |
| Min. rated working radius | 3000 | mm |
| Turning radius at turntable tail | 4000 | mm |
| Time for boom lifting/descending | 80 | s |
| Time for boom extension/retraction fully | 100/120 | s |
| Max. slewing speed | 2 | r/min |
| Max. load moment | Base boom | 1774KN.m |
| Fully-extended boom | 840.8KN.m | |
| Fully-extended boom+Jib | 318KN.m | |
| Outrigger Span | Longitudinal | 6m |
| Lateral | 7.2m | |
| Hoist Height | Base boom | — |
| Fully-extended boom | — | |
| Fully-extended boom+Jib | — | |
| Boom Length | Base boom | 11.5m |
| Fully-extended boom | 43m | |
| Fully-extended boom+Jib | 59m | |
Company Information
We are China China Made Src600c 60 Ton Rough Terrain Crane manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: China Cranes, China Made Src600c 60 Ton Rough Terrain Crane, China Rough Terrain Crane
