Band New Caterpillar Hydraulic Excavator 320gc

• Use up to 20% less fuel than the 320F excavators.
• Match the excavator to the job using power modes including new Smart Mode that automatically matches engine and hydraulic power to digging conditions.
• The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
• Your joystick commands adjust pump flow based on valve priority putting hydraulic pressure and flow where it needs to go giving you improved fast light-to-medium load cycle times.
• The electronically controlled, turbocharged engine meets U.S. EPA Tier 4 Final and EU Stage IV emissions standards using a transparent aftertreatment system that requires no operator input or downtime.
• Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
• Don’t let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 125 º F (52º C) and cold start capability of 0º F (-18º C). An optional -25º F (-32º C) cold start package is available .
• Work up to 9,480 feet (3000 meters) above sea level without de-rating.
• Track your performance through standard Product Link that provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes and other machine data on demand through VisionLink ® online interface.

RELIABLE, HIGH AND LOW, HEAT AND COLD

• Work up to 3000 m (9,840 ft) above sea level without de-rating.
• Standard high-ambient temperature capability is 52º C (125º F) with cold start capability at -32º C (-25º F). 
• Auto warm up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
• Three levels of fuel filtration protect the engine from dirty diesel fuel.
• Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
• The center track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
• The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.

WORK IN COMFORT IN THE ALL-NEW CAB

• The Comfort cab has a wide seat that adjusts for operators of all sizes. • Control the excavator comfortably with easy-to-reach controls all located in front of you.
• Standard automatic climate control keeps you at the right temperature all shift long.
• Advanced viscous mounts reduce cab vibration by up to 50 percent over previous excavator models.
• Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
• Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.

SIMPLE TO OPERATE

• Start the engine with a push button; use a Bluetooth key fob, smartphone app, or the unique Operator ID function.
• Program each joystick button, including response and pattern, using Operator ID; it will also remember climate control fan and radio settings.
• Navigate quickly on the standard high-resolution 203 mm (8 in) touchscreen monitor or with the aid of the jog dial control.
• Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.

MAINTENANCE

• Expect up to 15 percent less maintenance cost than the 320E. (Savings calculated over 12,000 machine hours.)
• Do all daily maintenance at ground level.
• Check engine oil level quickly and safely with the new ground-level engine oil dipstick; fill and check engine oil on top of the machine with a conveniently located second dipstick.
• Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
• Do no required maintenance on the Cat Clean Emissions Module.
• Change all fuel filters at a synchronized 500 hours.
• Expect the new air intake filter with pre-cleaner to last up to 1,000 hours – a 100 percent increase over the previous filter.
• The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval – 50 percent longer than previous filter designs.
• The new high-effi ciency electric cooling fans only run when needed and reverse to keep cores free from debris.
• S·O·SSM ports simplify maintenance and allow for quick, easy extraction of samples for fluid analysis.

SAFETY

• Access 100 percent of daily maintenance points from ground level – no need for you to climb on top of the excavator.
• Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the pushbutton starting feature.
• The standard ROPS cab meets ISO 12117-2:2008 requirements.
• Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
• A rearview camera is standard, and a right-side-view camera is optional.
• The new right-hand service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
• The handrails comply with ISO 2867:2011 requirements.
• The lower frame meets ISO 15818:2017 lifting and tie-down requirements.

EXCAVATOR ATTACHMENTS
From hammers to pulverizers, our attachments help you take on more jobs with your Cat Excavator.

WEIGHTS

SERVICE REFILL CAPACITIES

SWING

DRIVE

HYDRAULIC SYSTEM

WORKING RANGES – REACH BOOM – 5.7 M (18’8"); R2.9 (9’6") STICK

DIMENSIONS – REACH BOOM – 5.7 M (18’8"); R2.9 (9’6") STICK

DIMENSIONS – REACH BOOM – 5.7 M (18’8"); R2.9 (9’6") STICK