5 Ton China-Made Good Condition Wheel Loader LG855n Has in Stock
5 Ton China-Made Good Condition Wheel Loader LG855n Has in Stock image
Basic Info.
Model NO.
LG855N
Type
Small Loader
Rated Operating Load
5000kg
Machine Weight
16800kg
Bucket Capacity
3m3
Rated Power
162/2200kw/Rpm
Engine
Cummins/Shangchai/Weichai
Gearbox
Zf/Dana
Transport Package
Nude Package
Specification
7450*2500*3180mm
Trademark
Lonking
Origin
China
HS Code
8429510000
Production Capacity
100pieces/Month
Product Description
5 ton china-made good condition wheel loader LG855N has in stock
POWERFUL WEICHAI ENGINE
Product description
POWERFUL WEICHAI ENGINE
LONKING TRANSMISSION
LONKING AXLES
LONG WHEEL BASE
ROPS&FOPS CABIN
VARIETY WITH ATTACHMENT
CONVENIENT MAINTENANCE
RATED POWER:162kW/2200rpm
BUCKET CAPACITY:3.0m³
RATED PAYLOAD:5000kg
OPERATING WEIGHT:16800kg
BUCKET CAPACITY:3.0m³
RATED PAYLOAD:5000kg
OPERATING WEIGHT:16800kg
Paramaters
| NO. | DESCRIPTION | UNIT | DIMENSIONS |
| A | Overall Height – Bucket Raised | mm | 5275 |
| B | Bucket Pin Height at Max. Lift | mm | 4119 |
| C | Dump Clearance at Max. Lift ( 45°) | mm | 3062 |
| D | Reach at Max. Lift and 45° Dump | mm | 1276 |
| E | Rack Back Angle at Carry | ° | 48 |
| F | Rack Back Angle at Ground | ° | 45 |
| G | Digging Depth | mm | 50 |
| H | Rack Back Angle at Max. Lift | ° | 53 |
| I | Dump Angle at Max. Lift | ° | 45 |
| J | Carry Height | mm | 400 |
| K | Ground Clearance | mm | 409 |
| L | Center Line of Front Axle to Hitch | mm | 1615 |
| M | Wheel Base | mm | 3230 |
| N | Overall Length | mm | 8015 |
| O | Departure Angle | ° | 32 |
| P | Height to Top of Cab | mm | 3380 |
| Q | Overall Width over Bucket | mm | 3000 |
| R | Min. Turning Radius over Bucket | mm | 7170 |
| S | Min. Turning Radius over Tires | mm | 6537.5 |
| T | Steering Angle – Left/Right | ° | 35 |
| U | Width at Tread Center | mm | 2240 |
| V | Overall Width over Tires | mm | 2835 |
| OVERALL DATA | |
| Bucket Capacity | 3.0m³ |
| Rated Payload | 5000kg |
| Operating Weight | 16800±300kg |
| Traction Force | 155±3kN |
| Breakout Force | 170±3kN |
| L×W×H | 8015×3000×3380mm |
| ENGINE&ELECTRICAL SYSTEM | |
| Maker/Model | WEICHAI/WD10G220E21 |
| Emission Standard | EPA (Tier)/National |
| Engine Type | 4 Stroke,Turbocharged,Water-cooled,Direct Injection,Diesel Engine |
| Rated Power | 162kW(220hp)/2200rpm |
| Maximum Torque | 860N·m/1400-1600rpm |
| Bore x Stroke (mm) | 126×130 |
| No. of Cylinders/Displacement | 6/9.726L |
| Compression Ratio | 17 |
| Air Cleaner | Three Stage Air Cleaner with Cyclone Pre-cleaner |
| Alternator | 55Amp |
| Battery | 2-24V/120Ah |
| Starting Motor | 24V/7.5kW |
| Heating Capacity (W)-OPTIONAL | 5000W |
| Cooling Capacity (W)-OPTIONAL | 4700W |
| BRAKE SYSTEM | |
| Service Brake | Single Circuit Caliper,Dry Brake |
| Setting Pressure | 0.70-0.78MPa |
| Parking Brake | Flexible Shaft Controlled Caliper Brake |
| Emergency Brake | Flexible Shaft Controlled Caliper Brake |
| SERVICE REFILL CAPACITY | |
| Fuel Tank (L) | 285L |
| Hydraulic Tank (L) | 265/270(3rd Spool for Auxiliary Function)L |
| Crankshaft (L) | 20L |
| Transmission (L) | 46L |
| Front Axle/Rear Axle (L) | 28L/28L |
| STANDARD EQUIPMENT | |
| WEICHAI Engine | Flexible Shaft Controlled Caliper Brake |
| LONKING Transmission | Standard Lift&Bucket (3.0m³) |
| Mechanical Powershift Control | ROPS&FOPS Cabin |
| LONKING Axles | Mechanical Instrument Panel |
| Warm-air Machine | |
| OPTIONAL EQUIPMENT | |
| Cold Starting (-35ºC) | Quick-change Coupler |
| Oil-bath Air Filter | Quick-change Bucket |
| 23.5R25 ★★ L-3 TL | 3 Piece Cutting Edge,Bolt-on Type Bucket |
| 23.5R25 ★★ L-5 TL | |
| 3rd Spool for Auxiliary Function | Enlarged Bucket(3.5m³) |
| Sliding Cabin Window | Coal Bucket(4.2m³) |
| Electric Heating Rear Window | Log Fork |
| Lockable Oil Tank Cap | Grasping Pitchfork |
| Rear View Camera | Side Dump Bucket(2.5m³) |
| Pressure Testing Connector | Marble Fork |
| Air Conditioner | Fork(Quick-change Only) |
| Radio/MP3 | 4in1 Bucket(Quick-change Only) |
| High Lift &Additional Counterweight | Snow Blade(Quick-change Only) |
Pictures
Our factory
We are China 5 Ton China-Made Good Condition Wheel Loader LG855n Has in Stock manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: 5 Ton China-Made Good Condition Wheel Loader LG855n Has in Stock, China 3 Ton Wheel Loader, China New Wheel LoaderSimilar Or Related
Contact Information
- Mobile : (86) 15238067380
- WhatsApp : (86) 15238067380
- Email : [email protected]
If you have any questions or would like to book a session please contact us.
