210HP Motor Grader with Blade and Ripper Sem921

210HP Motor Grader with Blade and Ripper Sem921 image

Get a Quote Email to us

Product Description

Basic Info.

Model NO.

SEM921

Walking Mode

Wheeled

Type

Small Grader

Blade Width

4279mm

Engine Model

Sdec Sc9d220g2

Displacement

7.47L

Gross Power

162kw @ 2200rpm

Max. Lifting Heightn

475mm

Max. Depth of Cut

715mm

Operating Weight

15930kg

Min. Turning Radius

7800mm

Ripper

Optional

Fuel Tank

320L

Transport Package

Nude Package

Specification

8854*2630*3360mm

Trademark

CRUKING

Origin

China

HS Code

8429209000

Production Capacity

500sets/Year

Product Description

210HP Motor Grader SEM921

Product Description
Control System
7 position link bar with electric over hydraulic control allows ease of operation from within the cab
Optimum blade reach capability, quick DCM re-positioning for greater reach for better working on the high bank side slope
The link bar is essential for extending reach capability when cutting a bank slope or back slope of a ditch
Replaceable bushings reduce service time and cost
Blade Float
Standard blade float function allows the blade to lower without hydraulic pressure for increased versatility
Blade float is engaged by pushing the left and right lift cylinder controls all the way forward past the detent
Provides protection for machine and pavement during snow removal and snow plowing
Hydraulic System
Proportional Priority Pressure Compensating (PPPC) Valves contain specifically cut spools for motor grader applications, continuously matching hydraulic flow and pressure to power demands, allowing ease of multi-function control for optimizing working efficiency
World-class variable displacement piston pump, efficiently reduces power consumption and hydraulic system heat, improving fuel efficiency
The load-sensing hydraulic system provides consistent and precise blade movement, improving finishing performance
Inboard lock check valves within PPPC prevents inadvertent cylinder movement and potential leaks
Front Frame
Flanged box section design removes welds from high-stress areas, improving reliability and durability
Continuous top and bottom plate construction provides consistency and strength, improving front frame durability
Hydraulic hose routing minimizes exposure to damage and provides quick access for service
Maintenance-free bushings improve durability and reduce overall service cost
Large Cab
High-performance dashboard with 3 levels alarming monition system
Cab mounted on the front frame provides an exceptional view of the blade and the front axle even during articulation
Parameters

Model	SEM921
Operating Weight
Standard	15,930 kg / 16,230 kg (With ROPS)
With Front & Rear Counterweight	15,930 kg / 16,230 kg (With ROPS)
With Front Blade	16,530 kg / 16,830 kg (With ROPS)
With Ripper+Front Blade	17,340 kg / 17640 kg (With ROPS)
Operating Specifications
Top Speed, Forward	40 kph
Top Speed, Reverse	25 kph
Min. Turning Radius	7,800 mm
Articulation Angle, Left /Right	20 °
Gradeability	30 °
Wheelbase	6,140 mm
Travel Speed, Forward	5.3/9.1/12/20/25/40 kph
Travel Speed, Reverse	5.3/12/25 kph
Drawbar Pull	90 kN
Engine
Engine Manufacturer	SDEC
Engine Model	SC9DK220G2
Rated Power	162 @ 2,200 kW @ RPM
Max. Torque	920 @ 1,400 kN @ RPM
Emission	Tier 2
Displacement	8.82 L
Bore	114 L
Stroke	144 L
Number of Cylinders	6
Transmission
Brand / Manufacturer	Hangchi
Type	6WG180
Powershift Pressure	1,3~1.7 MPa
Forward / Reverse Gears	6 Forward / 3 Reverse
Parking Brake	/
Tandem Axle
Differential	No-Spin
Service Brake	Air to Oil, Disc
Secondary	Dual Circuit
Oscillation Front Up	15 °
Oscillation Front Down	25 °
Front Axle
Ground Clearance	602 mm
Wheel Lean, Left / Right	±18 °
Max. Oscillation	±16 °
Steering Range, Left / Right	±47.5 °
Hydraulic System
Circuit Type	Load sensing, PPPC
Pump Type	Variable Piston
Max. Pump Output	162.8 L/min
Max. System Pressure	22 MPa
Standby Pressure	2.4~2.6 MPa
Moldboard
Blade Width, Standard	4,279 mm
Blade Width, Optional	3,669 / 3,974 mm
Moldboard Height	610 mm
Moldboard Thickness	25 mm
Throat Clearance	85 mm
Float Function	STD
Moldboard Sideshift, LH	948.5 mm
Moldboard Sideshift, RH	824.5 mm
Circle Centershift, LH	926 mm
Circle Centershift, RH	758 mm
Max. Blade Position Angle	90°
Blade Tip, Forward	40°
Blade Tip, Backward	5°
Blade Cutting Angle	/
Max. Shoulder Reach outside of Tires, LH	2,698 mm
Max. Shoulder Reach outside of Tires, RH	2,407 mm
Max. Lift above Ground	475 mm
Max. Cutting Depth	715 mm
Service Refill Capacity
Fuel Tank	320 L
Engine Oil	22 L
Coolant	65 L
Transmission	28 L
Differential Case	33 L
Tandem Case, Each Side	62 L
Circle Drive, Non Slip Clutch	2 L
Circle Drive, With Slip Clutch	7 L
Hydraulic Oil Tank	55 L
Rear Axle (Main Reducer & Tandem)	157 L

Detailed Photos
Company Information

We are China 210HP Motor Grader with Blade and Ripper Sem921 manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.